DIY Shift Light, Maybe not completely Options

[Bigmeanbulldog55]

I'm wanting to put a shift light in my car, but I'm not exactly sure what to go for. Stock tach is great for me. In fact, I have a big preference for making things look as stock as possible. What I am thinking about is someone just hooking up a couple LEDs infront of the steering wheel so they are easily seen by me but not others. Anyone know anything about this DIY shift light stuff? Seems like I could tap into something that would send a signal at a certain rpm without paying $50 for it.

[K-ESD]

id jsut buy a cheap ebay one and take it apart to place the leds where ever.
http://cgi.ebay.com/ebaymotors/RPM-SHIFT-L...093155726QQrdZ1

I didn't see any that cheap before. As long as it's acturate, it will work. What I would like is to make a device to tell me what gear the car is in, and that's pretty easy to set up. And also have a top limit and bottem limit. That way, while racing I could keep the car right wear it needs to be.

it's fairly easy to do (i think)
mount a plate with 3 micro switches on front and back of the shifter assembly, place them according to where the rod sits in each gear and have a "normaly closed" circuit for the neutral.
Connect LEDs to a panel with semi transparent number/letters.
You don't need a switch for reverse, you have the reverse light circuit.

I thought about doing this and sticking the LEDs in the shifter itself (with a strong input resistor so they don't shine super bright)

Micro switch:


This post has been edited by K-ESD: Mar 11, 2007 - 9:39 PM