W.I. help, need to find a nozzle location Options

[Defgeph]

I need some help figuring out where I could install the nozzle for water injection. I took a look at my intercooler, there is no room on the outlet for the nozzle to be placed.

The only idea I have right now is to tap the cold star injector hole on the manifold. Or some how figuring out a way to use the extra vac tap on the back of the manifold as the injection point.

Any thoughts ?

[alltracman78]

If you mean the vacuum port that faces down, I wouldn't use that.
The CSI would be a good place. I would see how well your engine starts without it first.

It is probably in the best position to feed to all cyl equally [for any relatively easy installation anyways].

You could also tap a hole in the end of the plenum where the EGR valve goes.
It's nice and flat.
The only thing is, you will need to remove the manifold to do it....