Amp help *NOW WITH BIG UPDATE*, The LED went red Options

[aslearvert]

Ok, I have a power acoustik 980 watt plasma sphere amp (part # TS980-2... I think). Its hooked up to 2 kicker comp subs. Today I was listening to it at medium volume (not even close to the loudest I've ever had it) and the LED went from green to red. I'm pretty sure the subs didnt blow. There was no loud noise, It just stopped working. The amp wasnt hot at all so it didnt overheat. Is there some way to reset it or something. I've turned my car off and let it sit. I disconnected the power cable from my battery and the LED is still red which the manual says stands for "protect". I checked the fuses (by eye, not with a meter) and they seemed ok. Can anyone help me out with this? Is there a trick to get it working? What should I do?

Thanks for all your help

This post has been edited by aslearvert: Jun 14, 2007 - 9:09 AM

[aslearvert]

I checked the ground and its working. I checked all the fuses including the one by the battery, and its not blown. I disconnected the speaker wire and the LED was still red. I dont smell any burning or anything so I dont think the amp is blown. My fuse holder was a little burnt though because it looked like the fuse was bouncing around in it for awhile. So I am going to buy a new one and hook it up to see if it makes a difference. Any other suggestions?

-Thanks for all your help everyone.