 (5sfe)removing shifter cabling?? |
 Apr 2, 2007 - 10:11 PM
|
 
|
 Enthusiast  Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%)  |
This is pissing me off to the point to where I almost want to just cut the cables and figure it out after i pull the engine/tranny out..the picture is below..the last time i took out a tranny there was a bracket that held the cables to the transmission that I just had to unbolt, the celica doesn't have that..it looks like there is a nut to spin, but it doesn't seem to do anything. (by the way) does anyone want some JDM tails for a celica hatchback? I have the convertible and they don't fit..i'll ship them to your door..$280 obo..
-------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
 |
Replies
|
Apr 2, 2007 - 11:26 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
you are doing it wrong, it's easy.
there is a "C" clip holding it in. You can see the top of it from your pic. Just get a pair of vise grips or plyers and pull it strait up (you may want to wiggle it side to side a bit and spray some PB Blaster on it) and the clip will come out. Then the cable just comes right off the bracket. the same clips hold the cables to the shifter arms of the tranny, so you have 4 in total I believe. -------------------- |
Posts in this topic
match220 (5sfe)removing shifter cabling?? Apr 2, 2007 - 10:11 PM
match220 i've been pulling and pulling dude..the things... Apr 3, 2007 - 9:59 PM Batman722 they come strait out. They are difficult to get ou... Apr 3, 2007 - 10:25 PM match220 the diagram is kinda how i was imagining it..but i... Apr 3, 2007 - 10:36 PM Batman722 walmart or any auto parts store. PB Blaster is a p... Apr 3, 2007 - 10:43 PM match220 sweet..there's a walmart a mile up the road..i... Apr 3, 2007 - 10:48 PM alltracman78 PB Blaster/Deep Creep > WD40 Apr 4, 2007 - 5:01 PM match220 wow..i don't believe it. The c clip just slipp... Apr 4, 2007 - 9:18 PM
Batman722 QUOTE(match220 @ Apr 4, 2007 - 10:18... Apr 4, 2007 - 10:40 PM Rockford Batman... i need your help; do you know the part n... Apr 8, 2007 - 9:42 AM Batman722 st202 without SS is
33820-2b321
and st204
33820... Apr 8, 2007 - 12:21 PM Rockford QUOTE(Batman722 @ Apr 8, 2007 - 1:21... Apr 8, 2007 - 12:24 PM Rockford QUOTE(Batman722 @ Apr 8, 2007 - 1:21... Apr 8, 2007 - 3:16 PM hitcachi QUOTE(Rockford @ Apr 8, 2007 - 3:16 ... Apr 8, 2007 - 7:08 PM Rockford Done, i changed mine....
here cost like 300$ Apr 10, 2007 - 6:36 PM BonzaiCelica yes guys I know its an old thread so be it.
I ju... Jul 19, 2012 - 3:43 PM trdproven Not sure if you meant the Camry was S54 trans (M/T... Jul 19, 2012 - 4:15 PM njccmd2002 im most likely can get some oem shifters, if you n... Jul 19, 2012 - 9:14 PM BonzaiCelica the part number above, is that for both camry cabl... Jul 20, 2012 - 1:33 AM trdproven both camry cables each have their own part number ... Jul 20, 2012 - 6:12 AM BonzaiCelica thanks for the help. how about the 90-93 ST184 Cel... Jul 20, 2012 - 1:14 PM trdproven The 93 ST184 S53 tranny is similar to the camry sc... Jul 20, 2012 - 11:18 PM BonzaiCelica I saw a 97 Camry DX Manual Transmission at the jun... Aug 13, 2012 - 1:31 PM BonzaiCelica this is what 95 5sfe s54 shifter cable difference ... Sep 17, 2012 - 5:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 26th, 2025 - 4:52 PM |