Build Thread 2006-07-08 3sgte. Its DONE!, Dyno Vid inside of Low Boost. Options

[x_itchy_b_x]

well, i took out my first loan ever. for the winter so i can finally start making some good numbers with the 3s.
so i already started preping the motor/tranny to come out. the harness is completly off and should be dropping the tranny wensday. i get to start ordering parts thursday (when my loan gets deposited, WOOT). and hopfully ill hit my goal of 350+whp by may. so i started this thread top post pictures of w/e random crap i decide to take pictures of while working on my car. hopefully i can get a few guest appearances from other members


Saturday oct 14th ^


My children^

Pretty damn clean^
Monday oct 16th ^

This post has been edited by x_itchy_b_x: Feb 21, 2008 - 9:37 AM

[x_itchy_b_x]

Devilsden97: 279whp, 296torq

i hope not

91 JDM 3sgte
AEM Full Standalone Unit
Holset Hx35 Turbo (full boost around 4400rpm, so im told)
Wolkatz Top Feed fuel rail
Aeromotive FPR 1.1
870cc Delphi Injectors
HKS 264 ex 272 in Cams
Eagle valve springs
RMR Intake Manifold
Tail 38mm External Dump/Recirculated to DP
Heat resistant resin intake manifold gasket.
70mm Mustang Throttle Body
Cometic head gasket
ARP headstuds
Custom 3" Vband downpipe.
Fidanza cam gears
Solid motor mounts.
Aem Uego Wideband o2
Gm boost solenoid
Gm 3 Bar Map
Spec (or clutch master) stage 3 clutch
HKS filter
Apexi dual drive BOV
12x12 Oil cooler
3" mandrel bent exhaust side exit
300x600x3" Bar and Plate FMIC
2.5" - 3" aluminum mandrel bent Intercooler pipe.
Ngk bkre7 plugs
Aftermarket plug wires Manny gave me because he rules and my ghetto home made wires were leaking voltage.

I dont think i'm leaving anything out..