 Amp... |
 Apr 1, 2007 - 7:46 PM
|
 
|
|
Enthusiast  Joined Jan 18, '06 Currently Offline Reputation: 0 (0%)  |
okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help
|
 |
Replies
|
Apr 2, 2007 - 7:33 AM
|
|
|
Enthusiast Joined Mar 16, '07 From the gap that lies between one microsecond and the next... Currently Offline Reputation: 0 (0%) |
QUOTE(xpokeme @ Apr 1, 2007 - 8:46 PM) [snapback]542110[/snapback] okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help I saw similar posts floating around, not sure if they were yours, so excuse me if some of this was already covered... Make sure your ground is a solid contact onto bare metal. Get some sandpaper out if you have to. Check all fuses. Unhook the speaker wires. Does the amp still go into protect mode? Unhook the RCA's. Does the amp still go into protect mode? You didn't let the smoke out, did you? -------------------- The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.
--applejax |
|
Apr 3, 2007 - 7:05 PM
|
|
|
Enthusiast Joined Jan 18, '06 Currently Offline Reputation: 0 (0%) |
QUOTE(applejax @ Apr 2, 2007 - 7:33 AM) [snapback]542280[/snapback] QUOTE(xpokeme @ Apr 1, 2007 - 8:46 PM) [snapback]542110[/snapback] okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help I saw similar posts floating around, not sure if they were yours, so excuse me if some of this was already covered... Make sure your ground is a solid contact onto bare metal. Get some sandpaper out if you have to. Check all fuses. Unhook the speaker wires. Does the amp still go into protect mode? Unhook the RCA's. Does the amp still go into protect mode? You didn't let the smoke out, did you? Tried everything and still doesn't work.. could it be my wires er sumtin? should i buy a new one? lol diz sukkS! |
Posts in this topic
xpokeme Amp... Apr 1, 2007 - 7:46 PM
djestylez401 QUOTE(xpokeme @ Apr 1, 2007 - 7:46 P... Apr 1, 2007 - 8:06 PM
xpokeme QUOTE(djestylez401 @ Apr 1, 2007 - 8... Apr 1, 2007 - 8:47 PM netrata I routed my amp ground to the bolt that holds the... Apr 1, 2007 - 8:57 PM njccmd2002 Ive been told, ground wire of an amp, should not b... Apr 2, 2007 - 10:47 AM Redline08 i hooked my ground up to a bolt on the back on the... Apr 3, 2007 - 6:29 PM applejax Curious, what (brand of) amp is this we are discus... Apr 4, 2007 - 8:09 AM xpokeme QUOTE(applejax @ Apr 4, 2007 - 8:09 ... Apr 4, 2007 - 5:13 PM applejax QUOTE(xpokeme @ Apr 4, 2007 - 6:13 P... Apr 5, 2007 - 9:29 AM XS4lv1Truch0x check your blue remote turn on wire, make sure its... Apr 11, 2007 - 2:22 AM xpokeme QUOTE(XS4lv1Truch0x @ Apr 11, 2007 - 2... Apr 11, 2007 - 7:09 PM celi_gt_racer are you sure that your amps rated power is at the ... Apr 11, 2007 - 12:34 PM xpokeme okay now my amp doesnt even go to protect anymore,... Apr 13, 2007 - 8:09 PM CelicaST_CALI o dam,it might be fryed.Wat is the amp and subs?Di... Apr 13, 2007 - 9:19 PM xpokeme QUOTE(CelicaST_CALI @ Apr 13, 2007 - 9... Apr 14, 2007 - 12:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 24th, 2025 - 3:26 PM |