 Amp... |
 Apr 1, 2007 - 7:46 PM
|
 
|
|
Enthusiast  Joined Jan 18, '06 Currently Offline Reputation: 0 (0%)  |
okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help
|
 |
Replies
|
Apr 4, 2007 - 8:09 AM
|
|
|
Enthusiast Joined Mar 16, '07 From the gap that lies between one microsecond and the next... Currently Offline Reputation: 0 (0%) |
Curious, what (brand of) amp is this we are discussing? Does the owner's manual give a specific cause for the symptoms you are experiencing?
I am gathering from your original post in this thread that it does not go into protect until the remote turn on signal is sent, correct? Are there other amps in your system? If so, with the RCA's and speaker wires removed from the amp in question, remove the power wires or fuses of the other amps at the d-block, and remove their remote turn-on leads as well. Do you still get the pretty red LED? -------------------- The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.
--applejax |
|
Apr 4, 2007 - 5:13 PM
|
|
|
Enthusiast Joined Jan 18, '06 Currently Offline Reputation: 0 (0%) |
QUOTE(applejax @ Apr 4, 2007 - 8:09 AM) [snapback]543032[/snapback] Curious, what (brand of) amp is this we are discussing? Does the owner's manual give a specific cause for the symptoms you are experiencing? I am gathering from your original post in this thread that it does not go into protect until the remote turn on signal is sent, correct? Are there other amps in your system? If so, with the RCA's and speaker wires removed from the amp in question, remove the power wires or fuses of the other amps at the d-block, and remove their remote turn-on leads as well. Do you still get the pretty red LED? I have the dual 12' sub wit 580 amp.. when i unplug everything from the amp and install it bak in the led turns to red for like a second and turns off. when i remove the key and put it bak in the ignition theres no power to the amp and it doesnt even turn on.. so i dont know. any other suggestions? |
Posts in this topic
xpokeme Amp... Apr 1, 2007 - 7:46 PM
djestylez401 QUOTE(xpokeme @ Apr 1, 2007 - 7:46 P... Apr 1, 2007 - 8:06 PM
xpokeme QUOTE(djestylez401 @ Apr 1, 2007 - 8... Apr 1, 2007 - 8:47 PM netrata I routed my amp ground to the bolt that holds the... Apr 1, 2007 - 8:57 PM applejax QUOTE(xpokeme @ Apr 1, 2007 - 8:46 P... Apr 2, 2007 - 7:33 AM xpokeme QUOTE(applejax @ Apr 2, 2007 - 7:33 ... Apr 3, 2007 - 7:05 PM njccmd2002 Ive been told, ground wire of an amp, should not b... Apr 2, 2007 - 10:47 AM Redline08 i hooked my ground up to a bolt on the back on the... Apr 3, 2007 - 6:29 PM applejax QUOTE(xpokeme @ Apr 4, 2007 - 6:13 P... Apr 5, 2007 - 9:29 AM XS4lv1Truch0x check your blue remote turn on wire, make sure its... Apr 11, 2007 - 2:22 AM xpokeme QUOTE(XS4lv1Truch0x @ Apr 11, 2007 - 2... Apr 11, 2007 - 7:09 PM celi_gt_racer are you sure that your amps rated power is at the ... Apr 11, 2007 - 12:34 PM xpokeme okay now my amp doesnt even go to protect anymore,... Apr 13, 2007 - 8:09 PM CelicaST_CALI o dam,it might be fryed.Wat is the amp and subs?Di... Apr 13, 2007 - 9:19 PM xpokeme QUOTE(CelicaST_CALI @ Apr 13, 2007 - 9... Apr 14, 2007 - 12:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 25th, 2025 - 3:59 PM |