![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jan 18, '06 Currently Offline Reputation: 0 (0%) ![]() |
okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help
|
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 16, '07 From the gap that lies between one microsecond and the next... Currently Offline Reputation: 0 (0%) ![]() |
Curious, what (brand of) amp is this we are discussing? Does the owner's manual give a specific cause for the symptoms you are experiencing?
I am gathering from your original post in this thread that it does not go into protect until the remote turn on signal is sent, correct? Are there other amps in your system? If so, with the RCA's and speaker wires removed from the amp in question, remove the power wires or fuses of the other amps at the d-block, and remove their remote turn-on leads as well. Do you still get the pretty red LED? -------------------- The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.
--applejax |
![]() |
|
Enthusiast ![]() Joined Jan 18, '06 Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(applejax @ Apr 4, 2007 - 8:09 AM) [snapback]543032[/snapback] Curious, what (brand of) amp is this we are discussing? Does the owner's manual give a specific cause for the symptoms you are experiencing? I am gathering from your original post in this thread that it does not go into protect until the remote turn on signal is sent, correct? Are there other amps in your system? If so, with the RCA's and speaker wires removed from the amp in question, remove the power wires or fuses of the other amps at the d-block, and remove their remote turn-on leads as well. Do you still get the pretty red LED? I have the dual 12' sub wit 580 amp.. when i unplug everything from the amp and install it bak in the led turns to red for like a second and turns off. when i remove the key and put it bak in the ignition theres no power to the amp and it doesnt even turn on.. so i dont know. any other suggestions? |
![]() |
|
Enthusiast ![]() Joined Mar 16, '07 From the gap that lies between one microsecond and the next... Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(xpokeme @ Apr 4, 2007 - 6:13 PM) [snapback]543189[/snapback] I have the dual 12' sub wit 580 amp.. when i unplug everything from the amp and install it bak in the led turns to red for like a second and turns off. when i remove the key and put it bak in the ignition theres no power to the amp and it doesnt even turn on.. so i dont know. any other suggestions? Little confused here... Are you saying the amp now appears to be totally dead? -------------------- The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.
--applejax |
![]() ![]() |
Lo-Fi Version | Time is now: May 25th, 2025 - 8:34 AM |