ct 26, whats the stock psi for a ct26 Options

[jcaron9gt4]

hey guys...i was just wondering what the stock psi is set at for a ct26...ive heard its at 7, but then ive also read somewhere that its in the 5psi range. does anyone know for sure?

[x_itchy_b_x]

Exactly

And the TVSV can only raise boost from what the WG is set at.
It can't lower it.

sorry,
I havent experimented with my mbc since it doesnt currently work. Ok, so if you use the tvsv and either turn it on or off, manually, then you would stay at 5 psi.

If your WG actuator is set for 8 PSI, you can't go below that, period.

You CAN boost below 8 psi. when the tvis is activated it wont allow the car to boost past 5 psi. This is called SAFE mode. As ive heard it called. When the engine detects knock or cold temperature of the coolant temp.

Your a little confused. its ok though. OK whatever the WG is set to is the lowest possible boost you can run.
when "safe mode" activates it turns off the stock boost controller TVSV and you run W/e the WG spring is.
when "safe mode" isn't on, normal driving conditions it bleeds off air so the actuator opens later, thus upping boost.
i suck at explaining things.