power window rollup wont work...arghhh, ...can someonbe please help me on this Options

[lubu]

ok..so i got a window rollup module, but after everything is wired i get three clicks coming from the module everytime it receives a signal...and the windows wont roll up. wtf??
i connect:
the red wire to the + ter
the yell wire to the ignition ON
blacky to - ter
...powerout from the module i connect them to the green & red wires of the motor..
....signal wire is connected to the actuator....

...and...click...click...click....

can anyone please shine a light for me on this..i have been looking at it for the past 3 hours but...*sigh*

thanks

[lubu]

im using a negative wire of the actuator of the driver's door.which might not be correct..(blue/white)
can you tell me all the wire colours that i have to connect the module to in order for it to work, thanks

edit: i found a link http://www.caraudiomag.com/technical/0508c..._window_module/ it says that i need to slice one of the motor wire and connect the two wires
from the module to it...but thats a roll up/dn module (fig2). mine is only up..so i don think i need to cut anything do i?



This post has been edited by lubu: Apr 8, 2007 - 1:01 AM