power window rollup wont work...arghhh, ...can someonbe please help me on this Options

[lubu]

ok..so i got a window rollup module, but after everything is wired i get three clicks coming from the module everytime it receives a signal...and the windows wont roll up. wtf??
i connect:
the red wire to the + ter
the yell wire to the ignition ON
blacky to - ter
...powerout from the module i connect them to the green & red wires of the motor..
....signal wire is connected to the actuator....

...and...click...click...click....

can anyone please shine a light for me on this..i have been looking at it for the past 3 hours but...*sigh*

thanks

[Hanyo]

The celica convertable have rear windows. Since you didn't state what kind of celica you own, i decided to post all four windows just incase.

well, if this is the standard window roll up module. Then you will need to cut the green and green/white wires at your window switch and attach it to your module. just like figure 2 of your diagram.

I dont understand why you would need a relay.
another thing to note is, you do not need to attach the green/yellow wire to your acc.

try that and let me know if it works.

This post has been edited by Hanyo: Apr 8, 2007 - 7:50 AM