![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Hecho en la Republica Dominicana/Living in NJ Currently Offline Reputation: 0 (0%) ![]() |
Ok so i have an oil leak.. real bad one... so i'm going to have to pull the enging going to replace all the seals and gaskets , so i need my fellow Celicans help.. give me a good online site where i can order them ..
-------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Dec 14, '06 From MN, USA Currently Offline Reputation: 2 (100%) ![]() |
Check with Toyota... "toyota uses form in place gasket from the factory" I had a question about which gasket to use 3S or 5F and Manny (Pressure2) suggested it and highly recommends it.
|
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
QUOTE(99GT @ Apr 10, 2007 - 4:41 PM) [snapback]545304[/snapback] Check with Toyota... "toyota uses form in place gasket from the factory" I had a question about which gasket to use 3S or 5F and Manny (Pressure2) suggested it and highly recommends it. that would only be on the oil pan, and a few other spots on the motor. hes talking about gaskets for a rebuild kit. IIRC mac, a refresh kit from toyota is ~250-300 aftermarket will be much cheaper, but then you get aftermarket quality..you know how that can be. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 3:11 AM |