 MR2 MAP Sensor problem, i had problems |
 Apr 11, 2007 - 5:14 PM
|
 
|
 Enthusiast  Joined Aug 23, '05 From Princeton, Minnesota Currently Offline Reputation: 7 (100%)  |
so today i received my 2BAR MAP sensor from a 93 MR2. When i got it put in and started it up i got this-
 i checked the wiring diagrams and they should be the same so im not sure what to think. Any suggestions? BTW heres a pic of the 7A bracket modified to fit the 3S sensor  it wasnt too hard to bend it to the right position but the MR2 bracket might just bolt right on im not too sure. This post has been edited by Celiracer18: Apr 11, 2007 - 5:56 PM -------------------- -Brian
 |
 |
Replies
|
Apr 11, 2007 - 6:22 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
that is to be expected, when your tuning a new setup.
that is part of the turbo game. what size injectors are you using? if theyre over 400cc's your defiently gonna have to pull out some fuel down low just to get it to idle and run properly. i know i did, with the 460's on the 5s. IIRC, i had to pull out ~15% from idle to ~2000rpm or so -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
Celiracer18 MR2 MAP Sensor problem Apr 11, 2007 - 5:14 PM
presure2 what are we looking at, the car seems to be runnin... Apr 11, 2007 - 5:16 PM shin i thought the 2bar map is only for 5S???????? Apr 11, 2007 - 5:17 PM
presure2 QUOTE(shin @ Apr 11, 2007 - 6:17 PM)... Apr 11, 2007 - 5:19 PM Celiracer18 that video was at WOT. it almost dies at idle and ... Apr 11, 2007 - 5:43 PM presure2 QUOTE(Celiracer18 @ Apr 11, 2007 - 6... Apr 11, 2007 - 5:51 PM playr158 your ECU could getting the wrong readings from the... Apr 11, 2007 - 5:50 PM Celiracer18 i went back out and messed around with the safc2 a... Apr 11, 2007 - 6:03 PM rjbibeau pulling fuel down low..meaning what tuning wise or... Apr 12, 2007 - 12:24 PM hurley97 I'm surprised Manny hasn't explained it to... Apr 12, 2007 - 12:24 PM x_itchy_b_x honestly i think you need to be able to tell the e... Apr 12, 2007 - 12:34 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 20th, 2025 - 6:12 PM |