Apr 4, 2007 - 9:49 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 26, '07 From Boston, MA Currently Offline Reputation: 1 (100%) |
hey guys...i was just wondering what the stock psi is set at for a ct26...ive heard its at 7, but then ive also read somewhere that its in the 5psi range. does anyone know for sure?
-------------------- |
![]() |
Apr 20, 2007 - 1:37 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%) |
hmmmm, so much inconsistency, I just got a MBC because i got tired of 6psi(thats with 3in intake, Full exaust). Just yesterday i finally raised it to 9-10, pulls amazing, but i want to extract the most power possible.
My motor can more than handle it, it was rebuilt, with headwork and an 88MM bore(old was 87MM), the question is how much can I add with the stock engine management(ecu-fuel), and if I want more power what is something good to add? *I'd like to add that the rotating assembly is fully balanced This post has been edited by 95celgt: Apr 20, 2007 - 1:38 PM |
jcaron9gt4 ct 26 Apr 4, 2007 - 9:49 AM
shin the stock wastegate is set at 7 Apr 4, 2007 - 10:18 AM
jcaron9gt4 thanks alot Apr 4, 2007 - 12:04 PM
alltracman78 On the Celica/MR2 it's ~ 8PSI [sometimes a bit... Apr 4, 2007 - 5:10 PM
Supersprynt Also depends on your sea level. Mine was 8-8.5. Apr 4, 2007 - 8:08 PM
6strngs so, does this mean that if you put a CT-26 on a 5s... Apr 4, 2007 - 9:13 PM
Supersprynt No. Other variables control boost also, like exhau... Apr 4, 2007 - 9:23 PM
bufferdan Depends... my stock 93 mr2 ran 12psi stock....pu... Apr 5, 2007 - 12:06 PM
lagos QUOTE(bufferdan @ Apr 5, 2007 - 1:06... Apr 5, 2007 - 12:13 PM
6strngs so, if I use a boost controller will I be able to ... Apr 5, 2007 - 3:39 PM
Cisco93lude QUOTE(6strngs @ Apr 5, 2007 - 3:39 P... Apr 5, 2007 - 6:16 PM
toyotacrazy QUOTE(6strngs @ Apr 5, 2007 - 3:39 P... Apr 5, 2007 - 7:44 PM
presure2 QUOTE(toyotacrazy @ Apr 5, 2007 - 8... Apr 5, 2007 - 7:49 PM
alltracman78 Exactly
And the TVSV can only raise boost from wh... Apr 5, 2007 - 7:57 PM
toyotacrazy QUOTE(alltracman78 @ Apr 5, 2007 - 7... Apr 5, 2007 - 8:53 PM
alltracman78 QUOTE(toyotacrazy @ Apr 5, 2007 - 8... Apr 6, 2007 - 12:27 PM
toyotacrazy QUOTE(alltracman78 @ Apr 6, 2007 - 12... Apr 6, 2007 - 4:51 PM
presure2 QUOTE(toyotacrazy @ Apr 6, 2007 - 5... Apr 6, 2007 - 6:11 PM
toyotacrazy sorry posted to wrong topic Apr 6, 2007 - 6:24 PM
Gary QUOTE(presure2 @ Apr 6, 2007 - 6:11 ... Apr 6, 2007 - 7:02 PM
6strngs ok. I think I understand now. and I think I can sc... Apr 5, 2007 - 11:55 PM
x_itchy_b_x QUOTE(toyotacrazy @ Apr 6, 2007 - 5... Apr 6, 2007 - 5:36 PM
alltracman78 For a while I was swapping the damn things in my s... Apr 6, 2007 - 7:36 PM
toyotacrazy My wastegate must not be operating correctly. B/C... Apr 6, 2007 - 11:11 PM
presure2 are you swapped with a stock exhaust?
if not, you ... Apr 7, 2007 - 5:31 AM
malecrod QUOTE(presure2 @ Apr 7, 2007 - 5:31 ... Apr 8, 2007 - 3:09 PM
alltracman78 Don't forget, massively retarded timing, such ... Apr 8, 2007 - 4:15 PM
toyotacrazy QUOTE(alltracman78 @ Apr 8, 2007 - 4... Apr 8, 2007 - 4:30 PM
Gary QUOTE(95celgt @ Apr 20, 2007 - 1:37 ... Apr 20, 2007 - 1:59 PM
Alan Mine is 10psi stock not boosted, this is because o... Apr 22, 2007 - 11:01 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 1:00 PM |