Apr 22, 2007 - 10:07 PM
|
|
|
Enthusiast Joined Apr 22, '07 From Birmingham, Al Currently Offline Reputation: 0 (0%) |
I just bought my daughter a 97 Celica ST Limited Edition. Im trying to pin point a noise that I get when going above 40 mph but very prominent at 70. I get a thumping type noise that sound like a tire that was rotated and cupped but the tires (though needing to be replaced due to not much tread left) seem to be evenly worn. Could this be a wheel bearing. Im more use to a bearing making a roaring type noise.
|
![]() |
Apr 23, 2007 - 9:48 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
QUOTE(n2toyotas @ Apr 22, 2007 - 10:07 PM) [snapback]549450[/snapback] I just bought my daughter a 97 Celica ST Limited Edition. Im trying to pin point a noise that I get when going above 40 mph but very prominent at 70. I get a thumping type noise that sound like a tire that was rotated and cupped but the tires (though needing to be replaced due to not much tread left) seem to be evenly worn. Could this be a wheel bearing. Im more use to a bearing making a roaring type noise. I was just down there last weekend. What part of "The Ham" are you from? From my experience a wheel bearing is usually a roaring noise. Squeaks are normally something with the brakes. As for you, try rotating the tires front to back and see if it changes at all. If it does, it's your tires. If not, check your suspension parts, wouldn't hurt to have the alignment checked too, though it most likely isn't going to cause noise. -------------------- ![]() |
n2toyotas FRONT WHEEL BEARINGS Apr 22, 2007 - 10:07 PM
playr158 you could always jack it up and place ur hands at ... Apr 22, 2007 - 11:26 PM
LewFX my front bearing is bad too i believe, makes a squ... Apr 23, 2007 - 12:26 AM
Drew-887 Im having the same problem. My Front wheel on the ... Apr 23, 2007 - 12:39 PM
LewFX i reckon so, but ill find out Apr 23, 2007 - 12:54 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 11th, 2026 - 8:09 AM |