6G Celicas Forums

Welcome Guest ( Log In | Register )

> When does a T3/T4 60 trim work?, is it normal that it is at 4K revs?
post Apr 23, 2007 - 12:32 PM
+Quote Post
Conwa

Enthusiast
*
Joined Nov 5, '05
Currently Offline

Reputation: 0 (0%)




I recently installed a T3/T4 60 trim turbo on my 7afe, but is it normal that it start boosting at 4K revs?
I have a B16 manifold and a 2,5 inch downpipe.
It spools up @ about 3,5K but kicks in at 4K and stops at 6200 when it hits the rev limiter (of course)
Its running @ 0.45 Bar (7psi ?)
 
Start new topic
Replies
post Apr 24, 2007 - 10:28 PM
+Quote Post
angrymike



Enthusiast
*
Joined Mar 19, '07
From savannah
Currently Offline

Reputation: 0 (0%)




super 60 will puke on the top end if your running anything above 10psi.

good spool, so its fun to drive.
post Apr 25, 2007 - 6:51 PM
+Quote Post
trd94



Enthusiast
***
Joined Jan 9, '05
From green springs ohio
Currently Offline

Reputation: 1 (100%)




QUOTE(angrymike @ Apr 24, 2007 - 10:28 PM) [snapback]550350[/snapback]

super 60 will puke on the top end if your running anything above 10psi.

good spool, so its fun to drive.

i will agree to this , my super 60 did not have much up top when i was trying to run 12-14psi , but it was very fun to take off and drive , felt very stock like it was just ment to be there. now i run a bigger t3/t4 a 57 trim my full boost is at 4800-5000rpm and i have pushed out 17-20 psi the motor seems to hang in there but i dont trust the rods or pistons to handle that all the time . i run 12-14 every day for about 5 months now and i dont mind the (foreplay) lag biggrin.gif it just gives the other person a chance laugh.gif laugh.gif tongue.gif


--------------------
IPB Image

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 21st, 2025 - 2:19 PM