GT 4 hood rain cover, for large opening Options

[97lestyousay]

I have heard people mention it but haven't seen one.
I haven't swapped so the opening is directly over my
distributor on my 7A. I could probably make one easy
enough if I knew what it looked like. I thought about using
some 1/16" thick abs and cutting the shape on a cnc and mounting
it under the grate if anyone else needs or wants one I should be
making mine sometime in the next few weeks. If anyone has a
pic of a real one It would be greatly appriciated.

[97lestyousay]

I drew the shape and hole pattern, this is what it could look like
with no vents at all. I could put this or a trd logo or a regular toyota
emblem or some custom work with the right kind of file. I will look into
some louvered plate like the pic above and would still have room for a
small logo in the middle. I am still tinkering I will post more when I get
a chance. I thought about making something flat like below with big slots
and a seperate plate below that could be removed or opened and shut.
throw me some ideas.