 Sound system question? |
 Apr 30, 2007 - 11:23 PM
|
 
|
|
Enthusiast  Joined Dec 9, '05 From Long Beach Currently Offline Reputation: 1 (100%)  |
ok so check this out
iif i were to hook up a 3000 watt mono amp max to a 600 watt sub *its 2 subs* would it damage the subs if i had the gain set at like 25 percent? and would i have to change the wire running from the battery to the amp cause right now i think im using 16 gague wire? is it a must if im not going to have the amp at full blast? -------------------- Is this good enuff 4 ya? :D
 |
 |
Replies
|
Apr 30, 2007 - 11:26 PM
|
|
 Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
you need a lot more info than that... specs on the amp, brand, rated at 1 ohm? 2 ohms? subs... 600 watts rms? peak? , how do you have them wired--->>> very very very very very very important... it can be done easily but a lot more is needed to be known before i can sign off on it
16 gauge MUST BE CHANGED.... NEVER EVER run anything with a higher number than 10 for any amplifier... 3000 watt amp could use as large as 0/1 to be running efficiently This post has been edited by pittfirefighter: Apr 30, 2007 - 11:28 PM -------------------- Breaking Axles...
|
|
May 1, 2007 - 11:29 AM
|
|
|
Enthusiast Joined Dec 9, '05 From Long Beach Currently Offline Reputation: 1 (100%) |
QUOTE(pittfirefighter @ Apr 30, 2007 - 9:26 PM) [snapback]552730[/snapback] you need a lot more info than that... specs on the amp, brand, rated at 1 ohm? 2 ohms? subs... 600 watts rms? peak? , how do you have them wired--->>> very very very very very very important... it can be done easily but a lot more is needed to be known before i can sign off on it 16 gauge MUST BE CHANGED.... NEVER EVER run anything with a higher number than 10 for any amplifier... 3000 watt amp could use as large as 0/1 to be running efficiently ummmm its a legacy 3000 watt max 1 ohm stable mono amp. do i really need to change the wire if im not going to be cranking it up alot? ill prolly be using like 25% of the total power it has. its 2 subs giving out a 4 ohm load together to the amp. -------------------- Is this good enuff 4 ya? :D
|
Posts in this topic
XS4lv1Truch0x Sound system question? Apr 30, 2007 - 11:23 PM
XS4lv1Truch0x oh and this is off topic
but will 3000 watts be a... May 1, 2007 - 11:34 AM pittfirefighter you didn't answer my most important questions.... May 1, 2007 - 8:01 PM
XS4lv1Truch0x QUOTE(pittfirefighter @ May 1, 2007 - 5... May 1, 2007 - 10:12 PM pittfirefighter the subs say 4 ohms on them? how many prongs on th... May 1, 2007 - 11:11 PM Steevo I run a 600watt RMS amp in my Olds with two Pionee... May 1, 2007 - 11:23 PM afroman QUOTE(pittfirefighter @ May 1, 2007 - 8... May 1, 2007 - 11:33 PM pittfirefighter that actually is not wrong at all, i have posted v... May 2, 2007 - 7:41 AM afroman well i must say if i am wrong then i am wrong but ... May 2, 2007 - 8:42 AM Sinyk Now that the mud has been slung and the e-peens me... May 2, 2007 - 10:27 AM afroman guys sorry for the harsh replies, been a stressful... May 2, 2007 - 12:03 PM XS4lv1Truch0x ill tell you guys when i get the amp.
LoLz btw it... May 2, 2007 - 1:32 PM Sinyk I still think if you plan to run a 3000 watt amp e... May 2, 2007 - 1:42 PM pittfirefighter just to smooth things over... all the companies yo... May 2, 2007 - 10:46 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 12th, 2026 - 3:12 PM |