Turbo Project time. Options

[SoundSlut_dotcom]

ahh finally done with the body.. now its time for the turbo.. ( yes i know i should have went turbo then body) but it didnt work out that way,, ne way,, as most of u kno my car is mainly show.. and thats how i plan on keeping it.. yet i still need a turbo, im not looking for high speed, ,, i was thinking of going with a ebay b16 turbo kit, and buying a manifold to fit the t3/t4. . will this work?? has ne one done this?

help me out thanks

[shin]

i dont see how a b16 turbo will help.

nothing would really transfer over, except the intercooler and piping. You can not simply cut the b16 turbo manifold and reweld a 7afe flang on it, it actual requires some reworking of the pipes.

Why not buy the burien turbo kit. Or go custom?

burien kit is for 5sfe?? he's a 7a? for 7a you can use the B16 manifold. would fit with minimal work.

[Hanyo]

burien kit is for 5sfe?? he's a 7a? for 7a you can use the B16 manifold. would fit with minimal work.

So far, the b16 manifold flange can be cut off and the 4age flange can be welded on relativily easily. But for the 7afe engine, the 7afe flange does not directly line up with all the b16 exhaust runners. If you want to use a b16 manifold for the 7afte set up, you will need to cut off the b16 flange and then custom trim/adjust/rework at least two exhaust runners to line up with the 7afe flange. Therefore it will not fit with minimal work.

Untill I see a detailed how-to on how people manage to get the b16 manifold to work on the 7afe. I would not spread the rumor of it easily working.

This post has been edited by Hanyo: May 3, 2007 - 4:43 PM