Any Help?, Pittsburgh Transmission Swap Options

[pittfirefighter]

Alright guys i just bought a used auto transmission from another member here and i need to pull my old auto transmission in my 95 GT for this one. The old transmission is going as its lost reverse but it still drives which is nice. What type of difficulty level are we looking at for pulling a transmission and putting a newer one in its place? I've done a lot of work on turbos and intakes and whatnot but never messed with transmissions....
Also anyone in the Pittsburgh area that has experience able to give me a hand? We have a full garage with all the goodies....

[DrAg1n320]

Hi, if your doing it at home on the floor and with just hand tools, if i had to rate the difficulty from 1-10, 10 being the worst, i'm gonna say 11. haha, now i dont want to scare you, but you will have to drop the subframe while holding up the motor, that's probably the hardest part to figure out if your doing it on your garage floor. Now, on the other hand, if you had a shop and air tools, then the difficulty will prob drop to a 6. Not much special tools will be needed, but the only big concern is supporting that motor with no sub frame. O, and you dont' have to go crazy with that lock tite, only major one is on the flywheel bolts.