6G Celicas Forums

Welcome Guest ( Log In | Register )

> Noise coming from the engine, Knocking sound or Piston slap? Help, idk
post Apr 26, 2007 - 2:21 PM
+Quote Post
naxxal

Enthusiast

Joined Apr 26, '07
From Fort Lauderdale, FL
Currently Offline

Reputation: 0 (0%)




Hello everyone,

I have purchased 2 weeks ago a used 1995 St manual with 167,000 miles for $900.00 from my buddy, the condition of the car is great, except because friend of mine wasnt very cautious and carefull of his car, slacking on little problems causign others, anyways, my problem is this.

At idling i hear knocking sound coming from the engine, listening closer i would think something sounds like there is a little problem.

1. Valve knocking
2. Piston slaping
3. Engine mount
4. Or i do not know

a. Did some research, id there and engine knock than it needs to get adjusted, HOW?

b. If there is a piston slap, check which one by disconnecting a spark plus wire from each cylinder at a time untill knocking stops to get the right one, if so, Than WHAT?

c. Could it be an engine mount? Is so, than if i fill it with polytherine, from experience it will eliminate wheel hop but make higher vibrations, but will it mount better? sounds silly when someone may fill in broken engine mount to fix it, is it not?

If it something else let me know, please, i am slowelly repairing and tuning it up, so let me know, cause i want it to work well, thanks.
 
Start new topic
Replies
post May 4, 2007 - 4:20 PM
+Quote Post
Nemises

Enthusiast
***
Joined May 6, '04
From antioch CA
Currently Offline

Reputation: 0 (0%)




When was the timing belt last changed? They will start slapping around as they get worn. they are supposed to be changed every 60-75000 miles. check that too.

Posts in this topic
- naxxal   Noise coming from the engine   Apr 26, 2007 - 2:21 PM
- - lagos   you can rule out piston slap. get a video of the...   Apr 26, 2007 - 2:27 PM
|- - naxxal   QUOTE(lagos @ Apr 26, 2007 - 7:27 PM...   Apr 26, 2007 - 2:49 PM
|- - Kwanza26   QUOTE(naxxal @ Apr 26, 2007 - 7:49 P...   Apr 26, 2007 - 2:58 PM
|- - naxxal   QUOTE(Kwanza26 @ Apr 26, 2007 - 7:58...   Apr 26, 2007 - 3:25 PM
|- - Kwanza26   QUOTE(naxxal @ Apr 26, 2007 - 8:25 P...   Apr 26, 2007 - 3:49 PM
- - toyotacrazy   QUOTE(naxxal @ Apr 26, 2007 - 2:21 P...   Apr 26, 2007 - 7:44 PM
- - Tigawoods   well i had a knocking sound when i reved and i had...   Apr 26, 2007 - 9:39 PM
|- - toyotacrazy   QUOTE(Tigawoods @ Apr 26, 2007 - 9:3...   Apr 26, 2007 - 10:14 PM
- - lagos   normally if you have a noise in the bottom end, it...   Apr 26, 2007 - 9:48 PM
|- - naxxal   QUOTE(lagos @ Apr 27, 2007 - 2:48 AM...   Apr 27, 2007 - 12:11 AM
- - Redline08   It might be your lifters, LOTS of yotas develop li...   Apr 27, 2007 - 12:29 PM
- - Tigawoods   this is sounding way too familiar. if it is a rod ...   Apr 27, 2007 - 8:06 PM
- - DrAg1n320   Hey, thought i'd be able to chime in a little ...   May 3, 2007 - 9:53 PM
|- - alltracman78   QUOTE(DrAg1n320 @ May 3, 2007 - 9:53...   May 10, 2007 - 11:01 PM
- - rjbibeau   does the oil light flicker...if so you spun a rod ...   May 4, 2007 - 9:58 AM
- - topshed   It's probably big end bearings worn,connect an...   May 4, 2007 - 11:51 AM
- - Nemises   When was the timing belt last changed? They will s...   May 4, 2007 - 4:20 PM
- - naxxal   Hey guys, man so many replies, thanks alot, well i...   May 10, 2007 - 3:12 PM
- - Redline08   QUOTEThe cam lobes hitting the shims on top of the...   May 11, 2007 - 9:09 PM
- - stephen_lee   yeah, my valve train is also pretty noisy.. i...   May 13, 2007 - 1:32 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 8th, 2025 - 6:34 AM