![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) ![]() |
well due to how many people i've helped through the process, i've decided to make it simpler... send me your climate control box and tell me the color you want... $2 per LED including installation costs... about 12 LED's needed to complete, takes 1-2 days to complete and then shipped back to you... current color choices are blue, red, green and white (white is a little more expensive but is a pure white), PM me any questions or for address to send unit...
EDIT: I WANT TO ALSO ADD THAT THE WORK I DO IS NOT THE SPRAY-PAINT HOW-TO SHOWN IN THE HOW_TO SECTION, mine are LED's soldered into the board in the correct positions, every LED is tested before sending back to you to make sure it is working correctly, EVERY light on the climate control board will be whatever color you pick and can be changed in the future if you so wish, this is not a permanent modification like the spray paint (they will be the color for as long as you choose) PLEASE LOCK THIS THREAD This post has been edited by pittfirefighter: Jul 25, 2007 - 2:46 PM -------------------- Breaking Axles...
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%) ![]() |
QUOTE(pittfirefighter @ May 6, 2007 - 4:41 PM) [snapback]554751[/snapback] well due to how many people i've helped through the process, i've decided to make it simpler... send me your climate control box and tell me the color you want... $2 per LED including installation costs... about 12 LED's needed to complete, takes 1-2 days to complete and then shipped back to you... current color choices are blue, red, green and white (white is a little more expensive but is a pure white), PM me any questions or for address to send unit... Ive already converted mine to blue. Except for the green leds that show what is on or off. Do you have these for sale? Also, the leds I used for the background color for the setting of face-floor-defrost and so on, were too long. The illumination for this had a clear plastic insert that needs a small bulb. Mine are too long and illuminates dull. Are you leds short enough to illuminate this? How much for the bulbs or where did you buy them? Thanks |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 10:36 AM |