 Few issues |
 May 6, 2007 - 10:42 PM
|
 
|
 Moderator  Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%)  |
From the begining of my swap I've had low vac issues. I replaced hoses tightened everything up capped off holes.
I eliminated my AC and power steering. I have the hose for the AC idle up capped. Would I be better off capping the two PS vac lines?(current setup) Or should I connect them to each other with a hose. I'm close to having full vac, but its still alittle off. Second thing, when I slow down and put the car into neutral the RMP's dip way below normal idle. After running at like say 650-750 rpm for a few seconds, it raises back to 1000 where its been since the begining of this project. Sometimes the car stalls, I looking for some suggestions or ideas. I've checked timing, its set at 10d's. Thanks guys --------------------  I will return one day. |
 |
Replies
|
May 7, 2007 - 7:45 PM
|
|
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I tryed converting KPA to figure out what -99 actually means. I'm getting nowhere near 20hg. Anyone wanna take a shot.
-------------------- I will return one day. |
Posts in this topic
defgeph Few issues May 6, 2007 - 10:42 PM
95celgt man, for some reason my 3s has crappy vac as well,... May 6, 2007 - 11:03 PM lagos did you ever do a boost leak test? May 6, 2007 - 11:13 PM alltracman78 A boost leak won't affect idle quality at all.... May 7, 2007 - 6:39 AM lagos QUOTEA boost leak won't affect idle quality at... May 7, 2007 - 9:07 AM x_itchy_b_x QUOTE(alltracman78 @ May 7, 2007 - 7... May 7, 2007 - 9:37 AM defgeph I've done the boost leak test. I'm almost ... May 7, 2007 - 9:39 AM defgeph John, at this point I'm not sure what my vac i... May 7, 2007 - 9:44 AM lagos when you did your boost leak test, how many psi of... May 7, 2007 - 9:46 AM
defgeph QUOTE(lagos @ May 7, 2007 - 10:46 AM... May 7, 2007 - 9:54 AM defgeph Anybody have a vac diagram of a jdm 3sgte ? The ce... May 7, 2007 - 9:58 AM lagos have you checked the rubber hose right under the t... May 7, 2007 - 10:16 AM defgeph QUOTE(lagos @ May 7, 2007 - 11:16 AM... May 7, 2007 - 10:23 AM lagos there are bgb multimeter tests for the tps you can... May 7, 2007 - 10:26 AM defgeph QUOTE(lagos @ May 7, 2007 - 11:26 AM... May 7, 2007 - 10:28 AM x_itchy_b_x http://opc.mr2oc.com/online_parts_catalog/...sgteV... May 7, 2007 - 10:28 AM lagos QUOTE(defgeph @ May 7, 2007 - 11:28 ... May 7, 2007 - 10:30 AM defgeph RE: Few issues May 7, 2007 - 10:31 AM defgeph Ok I think I have this right. Some of these things... May 7, 2007 - 10:41 AM lagos you charcole canister should not be vented to the ... May 7, 2007 - 10:46 AM defgeph QUOTE(lagos @ May 7, 2007 - 11:46 AM... May 7, 2007 - 10:49 AM lagos i dont know about tvs and jet. jet seems like a fi... May 7, 2007 - 11:04 AM defgeph I'll give it a shot.
Being that I removed my ... May 7, 2007 - 11:09 AM lagos if you dont have ac, then you should just totally ... May 7, 2007 - 11:15 AM x_itchy_b_x I have all the tvis, tvsv, Power steering, and AC ... May 7, 2007 - 11:15 AM defgeph All the AC parts are removed. I'm talking abou... May 7, 2007 - 11:20 AM lagos you dont have to do anything with the wiring. May 7, 2007 - 11:36 AM brianforster also i never trust the readings of vacuum on my bo... May 7, 2007 - 1:51 PM defgeph Brian, whats the brand name of this inconsistent b... May 7, 2007 - 3:59 PM presure2 jeff the 3rd hose under your TB is your idle contr... May 7, 2007 - 4:19 PM defgeph QUOTE(presure2 @ May 7, 2007 - 5:19 ... May 7, 2007 - 5:14 PM presure2
Item Number MSRP Core Price Price
1734188381 ... May 7, 2007 - 5:22 PM brianforster QUOTE(defgeph @ May 7, 2007 - 8:59 P... May 7, 2007 - 7:03 PM lagos QUOTE(brianforster @ May 7, 2007 - 8... May 7, 2007 - 7:14 PM defgeph This boost controller Is a real PITA
I have ano... May 7, 2007 - 7:25 PM alltracman78 QUOTE(lagos @ May 7, 2007 - 9:07 AM)... May 7, 2007 - 8:13 PM Culpable04 QUOTE(defgeph @ May 7, 2007 - 7:45 P... May 7, 2007 - 8:36 PM lagos alltracman78.... i think what itchy was trying to... May 7, 2007 - 9:52 PM devilsden97 just read on May 7, 2007 - 10:02 PM x_itchy_b_x meh, i didn't mean to split hairs.
generally ... May 7, 2007 - 10:03 PM devilsden97 itchy. i didnt get 29.23 hg
i got.
-9.9 Kpa =... May 7, 2007 - 10:10 PM brianforster it would be important to note here that the gauge ... May 7, 2007 - 10:24 PM alltracman78 QUOTE(brianforster @ May 7, 2007 - 10... May 7, 2007 - 10:31 PM devilsden97 so move the decimal over one place to the right. May 7, 2007 - 10:25 PM alltracman78 QUOTE(lagos @ May 7, 2007 - 9:52 PM)... May 7, 2007 - 10:26 PM brianforster QUOTE(alltracman78 @ May 8, 2007 - 3... May 7, 2007 - 10:33 PM alltracman78 QUOTE(brianforster @ May 7, 2007 - 10... May 7, 2007 - 10:54 PM devilsden97 itchy and Brian, how did u get SUCH different numb... May 7, 2007 - 10:37 PM brianforster for every 1 number that our gauge is reading (-99 ... May 7, 2007 - 10:40 PM brianforster QUOTE(devilsden97 @ May 8, 2007 - 3... May 7, 2007 - 10:48 PM devilsden97 ^really?
edit:
-511.979225 mmHg = -20.1566624015... May 7, 2007 - 10:49 PM brianforster i understand, it was a misunderstanding, but now t... May 7, 2007 - 10:56 PM defgeph Brian, I'm wrong. I think your on the money wi... May 7, 2007 - 10:58 PM lagos greddy really did a crappy job with this thing, hu... May 7, 2007 - 11:04 PM brianforster not crappy , just lazy, its the same solenoid as t... May 7, 2007 - 11:55 PM Defgeph I'm going to swap in some new plugs (bkr7e) th... May 10, 2007 - 7:35 PM alltracman78 Spray starting fluid around any suspected leaks.
I... May 10, 2007 - 10:54 PM Defgeph QUOTE(alltracman78 @ May 10, 2007 - 11... May 10, 2007 - 10:59 PM Defgeph Update:
I checked the boost gauge as suggested by... May 14, 2007 - 11:49 PM celicast3sgte aw man i was kinda curious if that was the case. i... May 15, 2007 - 12:45 AM lagos QUOTE(Defgeph @ May 15, 2007 - 12:49... May 15, 2007 - 12:34 PM Defgeph I have a brand new set in the glovebox ready to go... May 15, 2007 - 2:49 PM lagos im gapped at 31 right now on bkr7e's and i don... May 15, 2007 - 4:03 PM Defgeph I have it installed. I have to check what its read... May 15, 2007 - 4:19 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 9:28 AM |