NED HELP!!!, any 3s owners, tuners or specialists needed Options

[celicaracer18]

Hi, I am working getting my 3s running

it was basically completely dissasembled and put back together

the bottom end has been built, here are all the specs

4th gen block w/ wiesco pistons and crower pro billet rods, custom cometic head gasket (brand new) with 3rd gen head and mostly 3rd gen parts except for the 4th gen manifold and top feed fuel rail.

well i finally got it all together, and got it cranked but i have water getting in my oil and oil in my water

does anyone know what it might be except for a head gasket

its a brand new head gasket so i hop thats not it, plus i really don't want to take the head back off


also what is the hose line coming out of the head right next to the intake manifold on the side closest to the tranny
where does that hose need to go



i have talked to a few people today, and most think it is either the head gasket didn't seal somehow, or possibly some passages are wrong between the 4th gen block and 3rd gen head, or my cometic head gasket is the wrong one

i'm hoping it is a head gasket problem at this point

is there a difference in a 3rd or 4th or a 2nd gen head gasket
cuz i think mine might be a 2nd gen

if anyone know of any big 3s tuners i would really appriciate if you could let me know thanks

[playr158]

Also did you have the block/head decked to insure they were flat clean surfaces?