![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 22, '07 From Greenville NC Currently Offline Reputation: 0 (0%) ![]() |
Alright, after lots of reading and whatnot, i have seen that when you take an ST and try to swap the 3sgte you have to remap all your mounts and have a lot of custom fab you have to do.
with that said, couldnt you do the same for a 4g63? (engine from Eagle Talons, Mitsubishi Eclipse, and EVO 8) i know it wouldnt be cheap, but neither is a 3s swap. what do you guys think about it? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
3sgte swap is like 25% of a mitsu swap
whoever said you have to "remap" (<-wtf is this?!) all your engine mounts lied you only have to drill 2 holes for 1 engine mount on ur passenger side otherwise all the other 3 mounts bolt into existing locations so there is like "custom fab" if you consider 30 seconds worth of drilling "a lot" go back read more ![]() but to techincally answer your question....yes it can be done...but expect to pay 4 times the amount or more of a 3sgte This post has been edited by playr158: May 9, 2007 - 1:26 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 12:01 PM |