![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jun 19, '06 From Portland, OR Currently Offline Reputation: 1 (100%) ![]() |
up for sale is my second e153. It's low miles and pulled from a 99 camry. Excellent shape inside and out.
I'm asking 400 OBO + s/h or 370 for local pick up. I also have a new condition ST185 outter axle, only one. I'm asking 50 + s/h. -------------------- 87 4runner DLX 22re, 5spd, 4.30gr, 4" lift, 30" tires, HID w/ Projectors, 6spkr + sub, custom exhaust, 94 celica leather seats, SR5 gauge cluster and clinometer. Future engine swap... possibly a 2jzge.
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jun 19, '06 From Portland, OR Currently Offline Reputation: 1 (100%) ![]() |
ahh.. I believe to use the stock e153 (with out the limited slip) you will need to use MR2 Turbo NON-LSD inner axles w/ carrier bracket/bearing.. and then the ST185 outter axles. The non-lsd mr2 inners are much more common and easier to find than the LSD inners.. I paid 400 dollars for my set of LSD inners from Toyota, but the non-lsd inners can probably be easily sourced at mr2oc, mr2board or at a junk yard.
I'll sell my one ST185 outter axle and the transmission shipped for 500.00 or local pick up for 400.00 I believe the transmission weighs about ... 120lb's itself. When I bought it I took it apart and cleaned everything inside and out in a parts washer.. I'm just about done re-assembling it. The inside is spotless now.. It's a good trans that'll last for a long time to come. Since it's still open, if the buyer has a limited slip I can install it no problem. This post has been edited by Punisher: May 11, 2007 - 11:53 AM -------------------- 87 4runner DLX 22re, 5spd, 4.30gr, 4" lift, 30" tires, HID w/ Projectors, 6spkr + sub, custom exhaust, 94 celica leather seats, SR5 gauge cluster and clinometer. Future engine swap... possibly a 2jzge.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 10th, 2025 - 2:43 AM |