Help needed with alarm install Options

[djseven]

I need to know how to ground negative. I have 1 black wire to ground it, but where do I stick this to? Also, I need to connect the alarm to my battery. Where can I run the wire to the battery? Can I pull it through the firewall where the cable from the climate control goes?

[Hanyo]

you have an overly complicated alarm system. Its quiet stupidly layed out. But I think i figured it out.

First, do you have a mulitmeter to measure what reading each wire does?

I think you need to connect the 6 wires like this:

orange: ground
orange/black: ground
white: car's wiring of unlock/lock
white/black: cars's wiring of unlock/lock


NOW BEFORE YOU GO AND CONNECT ANY OF THESE WIRES!!!! you will need to test them out. do this by:
1) connecting the orange wireS to the grounds. and then
2)connect a multimeter to one of the white wires.
3) set the multimter to OHMS settings.
4) use remote to unlock/lock the door.
5) notice the reading. The meter should flicker.
* if not then i messed up on reading your chart.
6) post on the forums of your results.