3SGE K&N "cold air intake", any one tried it on a non 3SGE celica? Options

[Valo666]

So i was lookin around for an intake for a buddy of mine and went onto K&N's website to see if they had it. After i found it, got the part #, i decided to see what they had for our cars. They had just pannel filters except for the 3SGE powered UK/JDM/EU celicas. So i took a look at the kit and how it installs and every thing..and to me it seems just like a 90 degree bent plastic pipe with a filter, then a snorkel that goes down into the splash sheild. The 90 pipe seems like a rip off for the price, but the snorkel idea is kinda interesting. Any one every rigged up a snorkel like on this kit? or does every one just run the piping through the regular intake box duct?

Link to instructions page so you can see what im talking about

[3WayStunna]

yes i have tried it on a 3sfe before, and the problems you will encounter are the diameters of the throttle body, and fitting it on there. if i remember right, the 3sge was bigger than my 3sfe...dont know if it will work on the 5s though....oh and also, as far as the ducting goes, a friend of mine thought that running the ducting from a cloths dryer, from the bottom of the car up to the intake was better than what was provided...i agreed ^_^

This post has been edited by 3WayStunna: May 22, 2007 - 1:29 AM