May 16, 2007 - 12:45 PM
|
|
|
Enthusiast ![]() Joined Mar 25, '07 From Holland Currently Offline Reputation: 0 (0%) |
I need to know how to ground negative. I have 1 black wire to ground it, but where do I stick this to? Also, I need to connect the alarm to my battery. Where can I run the wire to the battery? Can I pull it through the firewall where the cable from the climate control goes?
|
![]() |
May 23, 2007 - 10:50 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 2, '07 From Great Western Plateau Currently Offline Reputation: 9 (100%) |
for ur central lock you need to choose layout two...negative trigger.
basically connect yellow+yellow/black to ground white and white black to ur central locking module...which locates below the steering wheel. the two brown wires...i dont know if ur car is same as mine but i need to use two relays to make it work...you might need them too. the brake wire is near the brake...from the brake looking up you will see that when you press the pedal you release the switch, make sure you have the correct wire. cant help you much with remote start coz i havent come pass it. -------------------- ![]() 98% completion --- aaRon |
djseven Help needed with alarm install May 16, 2007 - 12:45 PM
Jeremiah The whole body of the Celica is grounded, so you c... May 16, 2007 - 2:07 PM
djseven thx jerimiah! i also found those 2 links u men... May 16, 2007 - 3:16 PM
Mangozac QUOTE(djseven @ May 17, 2007 - 6:16 ... May 17, 2007 - 4:23 PM
estaticd nc----orange
com---white
no----yellow
NC no conne... May 16, 2007 - 3:35 PM
djseven to be honest...i dont understand most of the manua... May 16, 2007 - 6:05 PM
estaticd QUOTE(djseven @ May 16, 2007 - 5:05 ... May 16, 2007 - 6:12 PM
djseven a million thx ecstaticd!!!
it says re... May 16, 2007 - 6:32 PM
estaticd QUOTE(djseven @ May 16, 2007 - 5:32 ... May 16, 2007 - 6:46 PM
djseven ive been working on this alarm for a few hrs now..... May 17, 2007 - 9:25 AM
lubu go here, probably everything you need:
http://www... May 17, 2007 - 1:17 PM
djseven yo guys i need ur help! ive scanned the instal... May 20, 2007 - 3:48 PM
Hanyo you have an overly complicated alarm system. Its q... May 20, 2007 - 4:49 PM
djseven Thx hanyo!!! I'll try this the fir... May 21, 2007 - 7:52 PM
djseven I havent been able to do anything today. But ive b... May 22, 2007 - 7:55 PM
Hanyo you need to read your manual to determine the engi... May 22, 2007 - 11:46 PM
djseven Thx alot again hanyo and lubu!
basically, the... May 23, 2007 - 7:20 PM
djseven im drinking a few beers and ive been looking at th... May 23, 2007 - 7:30 PM
lubu yea the lock/unlock wires go to the module...
get... May 23, 2007 - 9:19 PM
djseven just wanted to let u guys know that im short of ti... Jun 5, 2007 - 7:50 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 5:12 AM |