May 25, 2007 - 1:17 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) |
My car won't stay in gear for some reason. I can get it into first (for the most part) but going into 2, 3, 4, 5, r it won't stay. It pops back into neutral. I pull shift knob back into 2nd, and it just won't stay. If I wiggle/jiggle it a few time in and out I can manage to get it to (somewhat) stay in, but it doesn't seem to be in gear very good. Like when I am able to get it into gear the SLIGHTEST bump on the shift knob will knock it back out into neutral. Usually you can push the knob with a bit of force before the tranny will "pop" the gear back into neutral. Clutch fully depressed doesn't help either.
1st and 3rd are able to go in but dont stay very well (come out easily). 2nd is hit and miss (haven't found a way to "jiggle" it in). 4th needs to be wiggled around to get it in (while pulling back, can't pull back straight, need to wiggle and pull back to get it in gear), and reverse is hit and miss. Idea's? |
![]() |
May 25, 2007 - 1:43 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) |
Wouldn't synchro's just make the car grind going into different gears? You should still be able to get into/stay in gear with worn synchro's, but it wont be as "smooth" as it should be.
I would guess its something to do with the clutch, but I have no idea what could just fail on me so suddenly, as this just happened on the way home. Driving fine. stop at light. start to go again, and can't get past 1st. Car just no-load rev's when it should be in gear...3 and 4 dont engage/stay in gear either. Pull over. turn car off. start back up, same problems. play with shifter a bit, get it into 2nd, 3rd, 4th. start to drive again, and car won't stay in gear anymore. |
6gsillyca Car won't stay in gear May 25, 2007 - 1:17 AM
bccentaur3 sounds like all your synchros are screwed. May 25, 2007 - 1:23 AM
bccentaur3 I doubt its your clutch. This happened to my civic... May 25, 2007 - 2:02 AM
bindertch QUOTE(bccentaur3 @ May 25, 2007 - 12... May 25, 2007 - 6:06 AM
BigAl_UK Sounds like the infamous rubber bushes on the gear... May 25, 2007 - 6:18 AM
Bitter a bad mount can cause this also, the engine/trans ... May 25, 2007 - 10:03 AM
6gsillyca posted this up on a local forum and majority of pe... May 25, 2007 - 12:03 PM
Red94Celica Shift linkage IS a easy fix. I wouldnt give up on ... May 25, 2007 - 5:52 PM
bccentaur3 Yeah don't give up. May 25, 2007 - 6:00 PM
bindertch It won't be your forks causing it because 1st ... May 25, 2007 - 6:55 PM
bccentaur3 This same thing happened to my passenger side axle... May 25, 2007 - 7:09 PM
6gsillyca with engine off, the shifter still doesnt want to ... May 26, 2007 - 2:18 AM
BigAl_UK The bushes on the linkage wearing cause that probl... May 26, 2007 - 3:35 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 10th, 2026 - 6:12 PM |