May 26, 2007 - 9:16 AM
|
|
|
Enthusiast Joined May 15, '07 From Tyler Tx Currently Offline Reputation: 0 (0%) |
Swaped a 2.2 for another 2.2 and had some problems because it was my first time to work on a toyota. Well I got the car put back togeather and it will run but if you touch the gas it will die. At times you can slowly increase the rpms but it is touchy. I checked all the vac lines and replaced the hole throtal body with the one off the other motor, still no diff. so not I am thinking fuel filter or pump. If filter I plan to upgrade to a newer chevy filter for better flow and it cost about $30+ cheeper. What would a better pump cost? Or could it be something diff?
|
![]() |
May 26, 2007 - 9:53 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
Well if your car dies when you press on gas its either a clogged fuel filter or a bad fuel pump and I don't recommend using a chevy filter too stick with oem for the filter and the pump. Don't bother getting an aftermarket fuel pump unless you have "Big plans" for your 5sfe.
-------------------- "To Protect And To Serve The Wealthy" -POLICE
|
Eds94GT Car will only run at idle! May 26, 2007 - 9:16 AM
presure2 you should have replaced the filter with the motor... May 26, 2007 - 9:29 AM
Eds94GT Jk about the chevy filter! I have an oem on ... May 26, 2007 - 10:34 AM
Red94Celica 600+ HP is going to cost you a lot... May 26, 2007 - 10:49 AM
Eds94GT No prob 4 me, family owns a performance machine sh... May 26, 2007 - 11:09 AM
Remy A good aftermarket pump would be a walbro fuel pum... May 26, 2007 - 12:35 PM
Eds94GT Thanks for the help guys! Maybe now I can get... May 26, 2007 - 1:40 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 18th, 2026 - 5:52 PM |