![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) ![]() |
Im gonna be installing my new speakers in my doors on friday and im just trying to figure out how to get em off and if the adaptors i got with my speakers will fit.
this is the adaptor i got with the speakers, they are 6.5" JBLs ![]() would that work with the front speakers?? I remember there was somethin strange about the size of the front speakers and most ppl had to order thouse adaptor plates off the net. Any ways, back to the door pannel question, im guessin there is thouse 2 or 3 clips at the front, taking off the door handel cup, and then im lost there. Is it just clips??? Any help would be great. Thanks Bryan |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 13, '06 From UK Currently Offline Reputation: 6 (100%) ![]() |
Ok,
First, as you said take out the screw in the handle cup and remove that. Then take out the large gold screw inside there holding the panel in place. Then, there are two screws under the two round pop off cover caps near the front of the panel. One screw in the hole in the armrest 4 screws along the bottom edge 3 small round clips on the outside edge then lift up and remove I think that's all of em mate ![]() EDIT: Before removing, prise up the elec window switch panel from the back edge, and the red light, and disconnect them. This post has been edited by manphibian: May 30, 2007 - 4:51 PM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 3rd, 2025 - 12:16 PM |