![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Dec 11, '06 From New Jersey Currently Offline Reputation: 0 (0%) ![]() |
Alright well i'm going to take out my back seat in my coupe.. i know some people are probably against it but.. since i'm only 17 i'm only allowed to have one other person in the car, and the coupe back seats are small enough already to barely even fit people in it.
My idea was to get two subs build a custom box in where the back seat was.. but i don't know anything about building a box that would sound good? -------------------- "Drive Well...
...Drift Better" |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 7, '06 From wyomissing pennsylvania Currently Offline Reputation: 2 (100%) ![]() |
jaws, coupe back seats can be interchanged with hatch back seats, they weigh ~ 70 lbs and for a coupe you'd prolly have to take out some of the metal in that lil oval area that connects into the trucnk to fit a big box, otherwise just have it sit entirely in the cabin and actually have a trunk for a change, x2 for sprints idea with fiberglass if you want it to look nice, just take your time, do some research, make some small test projects, but a cheap setup, just make a box and mount that sucker in, for a how to, all you need is a 10mm wrench to take the top pieces out, and then the front just pulls up 2 clips on either side, pull the plastic push tabs off 5 or 6 of them if i remember and your done, take the tops off first, then the bottom
-------------------- you know why they put sheep at the edge of a cliff.... that way they push back!
![]() ![]() ![]() ![]() (2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss (2:28:08 AM) edit: that did the trick |
![]() ![]() |
Lo-Fi Version | Time is now: September 14th, 2025 - 9:47 AM |