 5sfte problem |
 Jun 17, 2007 - 5:45 PM
|
 
|
|
Enthusiast  Joined May 5, '06 Currently Offline Reputation: 0 (0%)  |
I put everything on my car for the turbo kit and now i do not have oil pressure, so i thought that i was just really low on oil then all together i put 5.5 quarts in cuz i have the oil filter relocate kit, and the turbo oil lines, however i still do not have oil pressure, so i took out the turbo feed line and cranked the motor and oil is nowhere to be found, i know the pump still works cuz the filter is full of oil. any suggestions on what may be wrong?
|
 |
Replies
|
Jun 18, 2007 - 8:55 PM
|
|
|
Enthusiast Joined Jul 10, '05 From Monroe, WA Currently Offline Reputation: 6 (100%) |
hey guys before you go telling him the gauge is faulty. read that he posted he took the pressure line off, cranked it, and got no oil coming out. this means there is infact no oil. so dont tell him its a gauge then he starts it and blows a bearing out.
youve added 5.5qt ontop of your normal oil level? (filter relocation and turb install?). take the line off the filter relocation kit and see if oil comes from that line when cranked over. then work your way back till you loose oil. also check if your filter housing is directional and if you have it hooked up incorrectly? -------------------- 94' ST Coupe - 5sfe Motor swap and brake swap.
 |
|
Jun 18, 2007 - 9:21 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE(celicast3sgte @ Jun 18, 2007 - 9:55 PM) [snapback]569843[/snapback] hey guys before you go telling him the gauge is faulty. read that he posted he took the pressure line off, cranked it, and got no oil coming out. this means there is infact no oil. so dont tell him its a gauge then he starts it and blows a bearing out. youve added 5.5qt ontop of your normal oil level? (filter relocation and turb install?). take the line off the filter relocation kit and see if oil comes from that line when cranked over. then work your way back till you loose oil. also check if your filter housing is directional and if you have it hooked up incorrectly? X2. check your filter relocation line setup if you have them. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
Posts in this topic
mycelicagt 5sfte problem Jun 17, 2007 - 5:45 PM
jcaron9gt4 if your reading that you have 0psi from a gauge, t... Jun 17, 2007 - 5:50 PM mycelicagt but i have taken the gauge and the feed line out o... Jun 17, 2007 - 7:26 PM rjbibeau does the car start. did you unhook the coil wire b... Jun 18, 2007 - 2:06 PM devilsden97 your sensor is bad/ when instaling the gauge you m... Jun 18, 2007 - 3:17 PM
mycelicagt well thanks guys but i figured out the problem, my... Jun 18, 2007 - 9:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 15th, 2026 - 2:45 AM |