![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 4, '05 From ST PAUL, MN Currently Offline Reputation: 3 (100%) ![]() |
starter wont crank...just clicks from the inside.(of car).there seems as if there is no power going to the starter..wierd thing is that the radiator fan stays spinning.rechecked all wiring harness plugs and ground..starter wont crank over..checked starter today and it is working fine. please can anyone help with this problem....wiring harness was made by dr.tweak so i trust that it is fine..ooh yeah i did and have checked all the fuses like 30 times already even have one of my buddys do it like 10 times..everything is right...
This post has been edited by RUNNIN-LOW: Jun 8, 2007 - 11:26 PM -------------------- ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 1, '03 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
I'm not sure what that 3rd pic is. It looks like it has 2 wires, so its not the map or distributer connectors, nor is it the TPS or Idle control. Wire colors would be helpful.
No luck on the connectors on my spare harnesses, sorry. Good luck finding a 3rd gen MR2 or ST205 injector resistor pack. You may just want to buy a couple of generic connectors connectors and use the resistor pack you have. The only difference between a 3rd gen and 2nd gen resistor packs are connectors. -------------------- Scott
West Michigan |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 10:16 AM |