Painting Interior Dashes Options

[mrgrape]

K so i wanna paint the inside of my car white
i am a total noob
do u guys take out the parts and then paint it or do u guys just paint it as is??
any step by step instructions?

[Arniel]

Gday mate, its really quite easy. Just don't go over the top or it'll look tacky and cheap. Also make sure you use a good quality paint and plenty of clear coat.

All you'll need is

Screwdrivers
380 grit wet n dry sandpaper
2000 grit " " " "
Some plastic primer spraypaint
Ur chosen colour in a good plastic/vinyl spray paint
Same type of clear coat.
Around abouts 6 hours.

Basically remove the bits u wanna do, wet sand them well with the 380 grit, then wet sand them again with the 2000 grit. Allow to dry completely obviously.

Lay down a good even covering of the plasti primer. Then a light coat of ur colour, then another coat, and a third if needed. Then u should atleast lay down 2 coats of clear or more if u like. (Obviously giving them a good amount of time to dry between each coat).
Allow to dry preferably overnight would be the better idea.

Now ud want to carefully pop them all back into place and enjoy!