Jun 21, 2007 - 11:17 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) |
im wondering how to manually open/close the top. is there something you need to disconnect/release before you can do this, or do you just overpower the motors?
my motors are working fine, but i think i have a loose wire, as the top will open then stop (sometimes halfway...). I dont think its the motors because when the top wont work, the motors aren't making any sounds (like they are on) and it happens very randomly. When the roof is closed, and i push the "close" button sometimes I can hear them working and others no noise, so I will try and check for a loose wire, but until then how do i do it manually? |
![]() |
Jun 21, 2007 - 11:48 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) |
First of all, I'm not sure i'd try to do it manually if your mtors do still work. There are already a few peole that have tried it manually and it just ended up killing thier motors because of the strain it puts on them.
I'd get your motors fixed first before trying to do it manually. But if you end up in a spot when you HAVE to do it manually, there is a switch in the trunk, right behind where the top would be when it's down that says "auto" and "manual", you just switch that to manual and you'll be able to put the top down without using the motors. -------------------- |
6gsillyca Vert owners Jun 21, 2007 - 11:17 AM
Element Those switches can be a bit of a pain as well...yo... Jun 21, 2007 - 3:23 PM
NaderG wow , never knew this one !! thanks for th... Jun 21, 2007 - 10:36 PM
6gsillyca Its not the motors, as when the top stops working ... Jun 22, 2007 - 12:14 AM
topshed check the manual overide switch behind the boot pa... Jun 22, 2007 - 4:20 PM
6gsillyca QUOTE(topshed @ Jun 22, 2007 - 3:20 ... Jun 23, 2007 - 12:56 AM
topshed don't ask me why but if the switch is not over... Jun 23, 2007 - 6:59 AM
IllIllIll My top did this once, & after I cleaned my swi... Jun 23, 2007 - 5:57 PM
Element QUOTE(IllIllIll @ Jun 23, 2007 - 10... Jun 23, 2007 - 9:56 PM
NaderG Do anyone know how many secs our 6gc vert's to... Jun 24, 2007 - 12:24 AM
6gsillyca Mine takes like 10 seconds. Its quick enough I can... Jun 24, 2007 - 11:37 PM
NaderG i am not entirely sure , but The 6gc has a unibody... Jun 25, 2007 - 12:51 AM
6gsillyca I'm pretty sure mine was done at asc, as I hav... Jun 25, 2007 - 12:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 21st, 2025 - 12:46 PM |