mr2 3sgte Q, searched but couldn't find info Options

[goferris]

hey all, i was looking online at some 3sgte clips and noticed how much cheaper the mr2t clips are then the gt4 clips that and i wouldn't have to get the tranny separate.
i know that there are some things diff between the gt4 3sgte and the mr2 3sgte. my Q is how much will have to be changed to drop it in my car? i have the gt so (from what i understand) i won't need to change the motor mounts. but other than the normal 3sgte swap stuff what extra will be needed to put the mr2 motor in?
if there is a thread about this already and someone know where it is please point me in the right direction.
thanks guys

[Supersprynt]

You will need ST205 motor mounts if you decide to go with the MR2 transmission (E153). You will also need custom axles (Camry/ST185 outters, MR2 inners).

Or you can just use your S54 transmission on the stock mounts and stock axles.

[goferris]

You will need ST205 motor mounts if you decide to go with the MR2 transmission (E153). You will also need custom axles (Camry/ST185 outters, MR2 inners).

Or you can just use your S54 transmission on the stock mounts and stock axles.

even though i have the s series motor i will still need new motor mounts? i was always under the impression that they are the same
am i going to need new mounts for the tranny? i already knew about the custom axles. and don't i need to move some stuff on the engine itself. do i have to move the alternator or ac or something?

Edit: 0k i see what you were saying about the mounts. they would be for the tranny. could i use the mounts from the mr2?

This post has been edited by goferris: Jun 26, 2007 - 8:42 PM