![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 22, '07 From Murphy, TX Currently Offline Reputation: 5 (100%) ![]() |
hi - hope you guys can help me out -
i recently replaced all four bearings - front strut mounts - driver side axle - and had a wheel alignment - - my car is now pulling to the left when accelerating - if i hold the steering wheel firmly then its not really noticeable, but if i hold it freely then it is - I took it to a local shop and they thold me that the front control arm bushings is probably causing the problem - Is that correct that the control arm bushing could cause this problem? Is this a part that I can replace or do I have to replace the entire control arm (assuming bushing comes with it), because when I searched parts catalog on https://www.1sttoyotaparts.com/partscat.html it does not have it. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 22, '07 From Murphy, TX Currently Offline Reputation: 5 (100%) ![]() |
checked and normal - 44 psi on both side
on a side note -- is 3k rmp in 5th gear at 60mph normal -- it seems high to me - would timing fix this my girlfriends civic is at 2500rmp at 60mph - her's an auto though This post has been edited by 2bcelica: Jun 27, 2007 - 11:04 AM |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 12:19 AM |