ANTENNA replacement, Any how-to step by step of taking out the antenna in the back? Options

[chacha]

i need some step by step guide to take out the antenna in the back...the antenna was up during a car wash and the machine twisted and bent my antenna, now it clicks and makes noises as it tires to motor out the antenna when i turn on the radio....i need to replace it, but first i need to take it out....for those who know how...please address to this message. Im going to replace it with a new antenna, what must i do to cover up that hole? bondo? how to use bondo?

[RbrtNdrws]

You have to take the bolt out on the inside of the car but you also must unscrew the top silver piece on the outside of the car. It should slide right off after that.

Heres what I'm talkin about for the outside:



That piece. Remove it with a flathead screwdriver... Just push in one of those slots and sort of turn eventually it will start to break lose and you can unscrew it.

[laff09]

You have to take the bolt out on the inside of the car but you also must unscrew the top silver piece on the outside of the car. It should slide right off after that.

Heres what I'm talkin about for the outside:



That piece. Remove it with a flathead screwdriver... Just push in one of those slots and sort of turn eventually it will start to break lose and you can unscrew it.

And if that doesn't work, like it didn't for me, use a utility knife and cut around the hole, and pop an s2000 antenna in there