![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 8, '07 From Houston, Texas Currently Offline Reputation: 1 (100%) ![]() |
I took some pictures of my Ebay'ed CAI. I havent installed it yet and I probably won't until I buy a bypass valve. I believe I recieved a 3 inch pipe.
In the following picture, it looks maybe 2.75 but that is only on that side. When you turn the pipe, it is 3 inches. ![]() This is a picture of the start of pipe that the filter connects to. Not the end for the filter, the other end. For some reason, I got a 3 Inch Pipe. I think that's what it is. Is this going to mess up my intake? ![]() This is a picture of the two pipes and filter I recieved. The red circled parts are the two pipes I talk about in my previous post. As you can also see on the pipe without the two small things, there are two dents, probably not much of a concern. ![]() A closeup of the two little pipes. ![]() This is the 3 inch filter I recieved. It is big. ![]() 6 Inches long. From this information, what can you tell me? Is it too big? I fear I spent 30 bucks on something that wont work for me. I found a bypass valve for 44.95 near where I live. I need the 3 inch one right? Thanks! -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 8, '07 From Houston, Texas Currently Offline Reputation: 1 (100%) ![]() |
Well, interestingly enough, the CAI didn't fit. 3 inches was way too large. Right now I don't know what to do.
-------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 12:22 PM |