 SRI Heat Shields, How can I make one? |
 Jul 1, 2007 - 10:49 PM
|
 
|
 Enthusiast  Joined Jun 8, '07 From Houston, Texas Currently Offline Reputation: 1 (100%)  |
Just installed a custom SRI, how can I fabricate a heat shield?
-------------------- |
 |
Replies
|
Jul 1, 2007 - 11:08 PM
|
|
 Enthusiast Joined Aug 18, '04 From Silverdale, WA Currently Offline Reputation: 0 (0%) |
Buy a peice of aluminum. Measure around the widest part of your filter. Add about 2 inches to that length. Measure from the top to the end of the rubber coupler. Cut your aluminum as wide as the first measurement by the second measurement. Say 12" x 6". Then cut 3 or more strips from the aluminum about 1/2" wide by about 4 to 6 inches. Drill holes along the side that is as long as the first measurement. Rivet or use small bolts to attatch the strips so they can go from the aluminum to the tubing for the intake. Now bend the shield around the filter and bend the strips down to the tubing so that you can use a hose clamp to secure it to the tubing.
I have attached a cheap paint pic to help. http://i43.photobucket.com/albums/e362/bin...iltershield.jpg This post has been edited by bindertch: Jul 1, 2007 - 11:09 PM |
Posts in this topic
cHinaman727 SRI Heat Shields Jul 1, 2007 - 10:49 PM
cHinaman727 QUOTE(bindertch @ Jul 2, 2007 - 4:08... Jul 8, 2007 - 4:08 PM
DeW_H0e_GT this is for a turbo heat shield..but the rules sho... Jul 2, 2007 - 4:23 PM SlowCelica94 If I use one of mine teflon coated pans, can it be... Jul 2, 2007 - 4:47 PM Valo666 QUOTE(DeW_H0e_GT @ Jul 2, 2007 - 4:2... Jul 2, 2007 - 7:40 PM cHinaman727 does a heat shield go all the way around the filte... Jul 6, 2007 - 10:54 PM DeW_H0e_GT 180 degrees..... Jul 6, 2007 - 10:55 PM cHinaman727 is 18 bucks too much to pay for one? I never have ... Jul 19, 2007 - 6:44 PM Gary You can start with a piece of cardboard and make a... Jul 20, 2007 - 6:58 AM cHinaman727 whats a cold air box? Jul 20, 2007 - 11:48 AM Gary It's a box that completely seal the filter pre... Jul 20, 2007 - 12:47 PM cHinaman727 QUOTE(Gary @ Jul 20, 2007 - 5:47 PM)... Jul 20, 2007 - 7:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 7th, 2025 - 8:16 AM |