JDM Projectors - Did you do the LHD Conversion?, And yes, I searched and read posts Options

[Celicav]

Alright, so I won my Low beam projectors off Ebay and they are in route. I have read up on installation (thanks Tina, Jason), LHD conversion (thanks Kadett), etc. So, questions for the US/LHD driving members in here that have installed the Projectors -

Did you do the the LHD conversion in order to supposedly not "blind" oncoming traffic? If you did not, have you had a lot problems with people flashing their lights back at you? From my searching, it does not seem that many have done the conversion (or they just don't post it). I would really like to get as many responses as possible to get a feeling for how bad the problem really is in affecting the oncoming cars.

Did you not TRY the conversion due to risk of damaging these very expensive lights? Yeah, the whole taking the glass off and putting back on scares me too. Maybe I'll just pay Kadett to do it or try this new aluminum foil idea proposed by Culpable

Finally, if your state requires annual inspections, do these projectors cause any issue, esp. if you did not do the LHD conversion?

Thanks!!

[6gsillyca]

I had left them as RHD until I got my hid system. I didn't want to be blinding people with hid, but I also wanted to properly light up the road (you cant do this properly with rhd projectors, otherwise you are blinding people) so i read and reread kadett's sticky and finally got around to doing the conversion. There are a few things I wish I had known before I started, but if I had to, I would do it again. Its not that hard.

I am (for the most part) happy with the conversion, and I would recommend it for those with hid.