 3sgte oil pan on a 5sfe, temporarily plugging up the extra drain hole |
 Jul 11, 2007 - 10:19 PM
|
 
|
 Enthusiast  Joined May 16, '05 From Toronto, Ontario Currently Offline Reputation: 8 (100%)  |
er... what can i use to safely temporarily plug up the extra hole on the 3sgte oil pan for the oil drain line from the turbo?
i don't hv time to install everything @ once so i'm kind of slowly installing couple things in 1 by 1. -------------------- |
 |
Replies
|
Jul 12, 2007 - 9:49 PM
|
|
 Enthusiast Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) |
That would be a HUGE bolt.....
Good luck finding one in that size. That plate won't help either. I would leave it until you install the turbo..... You can find one, there are alot of supply places online. However you will have to figure the diameter and thread pitch first. I don't recall what it is and don't have any out to measure. It might even be metric pipe thread and not regular thread..... If you do go this route be careful removing it and use teflon tape on the bolt. This post has been edited by alltracman78: Jul 12, 2007 - 9:49 PM --------------------  |
Posts in this topic
elvasoshexai 3sgte oil pan on a 5sfe Jul 11, 2007 - 10:19 PM
CaliJeff This might help, however, pressure or sum1 else ca... Jul 12, 2007 - 12:27 AM SlowCelica94 a bolt with the same thread pitch and size.
Edit:... Jul 12, 2007 - 12:56 AM
SlowCelica94 You can easily find a bolt that big.....
Check yo... Jul 13, 2007 - 2:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 28th, 2026 - 8:26 AM |