![]() |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
hey guys, got my Devils Own water/methanol injection kit installed this afternoon, with a 3GPH nozzle, art had told me how much he liked his, so i went ahead and got one.
![]() i basicly installed it the same as art, very easy to install. MAN, this stuff is awesome. ![]() the best way for me to discribe it is that the car feels like it did when i mixed in the race gas. no hesitating, nothing, just pure power, thruout the RPM band...AND,..i turned the boost back up.... 13+psi will be the new daily.. ![]() ..and i havent even touched the emanage yet.. once i get the EM ultimate a bit better fine tuned, ill head back to the dyno to see what it makes on pump, with the smurf piss. i anticipate it will be very close to the race gas mix #s, which would be awesome. race gas #'s with $1.99 windsheild washer fluid.. ![]() -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 28, '04 From FLA USA Currently Offline Reputation: 4 (100%) ![]() |
Where did you get that from?
![]() Most alltrac guys I know running WI, have the nozzle on the TB inlet. And the water tank should be as far as possible from the heat source (engine) This post has been edited by Gary: Jul 17, 2007 - 12:35 PM -------------------- _Gary
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 2:21 AM |