water/methanol injection installed!, like art said, smurf piss FTW! Options

[presure2]

hey guys, got my Devils Own water/methanol injection kit installed this afternoon, with a 3GPH nozzle, art had told me how much he liked his, so i went ahead and got one.
i basicly installed it the same as art, very easy to install.
MAN, this stuff is awesome.
the best way for me to discribe it is that the car feels like it did when i mixed in the race gas. no hesitating, nothing, just pure power, thruout the RPM band...AND,..i turned the boost back up....
13+psi will be the new daily..
..and i havent even touched the emanage yet..
once i get the EM ultimate a bit better fine tuned, ill head back to the dyno to see what it makes on pump, with the smurf piss. i anticipate it will be very close to the race gas mix #s, which would be awesome.
race gas #'s with $1.99 windsheild washer fluid..

[malecrod]

Just a suggestion, for those of you with the top mount: what if you fabricate 2 large enough washers fitting the contour of your rubber inlet and with holes tap/threaded in them for the nozzle. One of each washer on either side of the rubber inlet( that is inside and outside) to hold the nozzle. i think this might actually hold the nozzle securely and prevent it from being sucked in.
The only problem I see here might be the nozzle not being long enough to go through all the washers. But is something to look into if not tried already.