How To: View DVD & Navigation While Driving, For the Pioneer AVIC-D3 Options

[CaliJeff]

Tools needed:
Needle nose pliers
2 Wire tap-in's

Time Required:
5 minutes

STEP 1. Remove the mute wire (yellow and black wire) from the AVIC-D3 harness with needle nose pliers. This is located on the output or "rca" harness. Do this by placing the pliers nearest to the harness, and gently pulling out.
*** If you would like to retain the mute option you can go to radio shack and pick up a wire with the same end on it *** this wire should cost about 20 cents.

STEP 2. Move this pin into the empty slot above where you took the mute wire from.

STEP 3. Ground the wire you just moved (yellow and black wire) to main harness (black wire) with wire tap in.

STEP 4. Ground the parking brake lead (green wire) to main harness (black wire) with wire tap in.


*** Note - This technique for viewing movies while driving is strictly meant for Off-road use only.






This post has been edited by CaliJeff: Aug 2, 2007 - 2:29 PM

[Dragondog]

i have the dual brand 7in flip out screen i would like a bypass plz help....

has a extralong yellow wire that it wants to hook up to the e.brake...how do i bypass this i already have a toggle switch but is the wire ground or live i dont know iv played with it and yet i still get no pic i get sound but no pic(screen works fine) is there another wire i should be looking at too...there is a brown wire i dont know what its for....... help thanks

[CaliJeff]

i have the dual brand 7in flip out screen i would like a bypass plz help....

has a extralong yellow wire that it wants to hook up to the e.brake...how do i bypass this i already have a toggle switch but is the wire ground or live i dont know iv played with it and yet i still get no pic i get sound but no pic(screen works fine) is there another wire i should be looking at too...there is a brown wire i dont know what its for....... help thanks

what's the model ?