Jul 22, 2007 - 2:39 PM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 27, '07 From cape coral/ft myers florida Currently Offline Reputation: 7 (100%) |
what do i need to do this
im wanting to add another in my engine bay do i just need to split the power and grounds to each battery? and then hook up what i want on the second battery? -------------------- ![]() BOOST GETS YOU LAID!!!! |
![]() |
Jul 23, 2007 - 3:13 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
Optima Yellowtop would be a good choice. Deep cycle sealed battery.
Me running 0gauge through the celica Convenient grommet next to battery in engine bay ![]() Cable ties are your friend ![]() Back into the engine bay it goes(you might want to use the hole that leads into interior but I did not want to damage the foam there). Still need to find a rubber grommet to cover the hole or modify the original plastic one a little to accomodate both wires. - Managed to fit cable through plastic grommet which is not shown in pic. Firewall grommet.
This post has been edited by soven: Jul 23, 2007 - 3:24 AM |
jesterwr217 adding a second battery Jul 22, 2007 - 2:39 PM
soven Get a Battery Isolator. Jul 22, 2007 - 7:17 PM
Dragondog how hard is it to relocate my batt. to the deck (t... Jul 22, 2007 - 9:04 PM
soven Run 1 gauge cable from engine to trunk . Add a cir... Jul 23, 2007 - 12:25 AM
Dragondog WHAT is the best type (brand) of batt for this and... Jul 23, 2007 - 3:02 AM![]() ![]() |
| Lo-Fi Version | Time is now: March 22nd, 2026 - 7:26 PM |