6G Celicas Forums

Welcome Guest ( Log In | Register )

> lighter, cig lighter not working
post Jan 5, 2003 - 11:31 PM
+Quote Post
nicksceli

Enthusiast
**
Joined Oct 24, '02
From pennsylvania
Currently Offline

Reputation: 0 (0%)




yesterday i was inflating one of my tires with a compressor that plugs into the lighter and all of a sudden it stopped working. i thought it was the compressor but i checked and it wasnt. i also checked the fuse box next to the driver side door but no fuses were blown. any ideas as to why this is not working? i just bought neons and was going to hook them up to it so i need it to work. anything will help
 
Start new topic
Replies
post Jan 10, 2003 - 2:58 PM
+Quote Post
jontechie



Enthusiast
**
Joined Oct 25, '02
From London- England
Currently Offline

Reputation: 0 (0%)




Heres what to do, If the Cig/Rad spade fuse in the panel
(drivers side by boot release) hasn't blown then your
going to have to pull out the centre panel surrounding the
gearstick gator. The female socket of the cig lighter has
2 connectors to it, one is the illuminator, the other is the
power supply.Remove these and the centre panel should
be free to move.Turn it round, heres the tricky bit.There is
a tiny fuse attatched at the back of the female socket, it looks like a tiny tantalum capacitor.This will almost certainly have burned out.Its held in by 2 crimps.Your gonna have to bend these crimps, remove the fuse and replace with a short piece of suitable guage wire and press the crimps back to grip the wire.Reconnect all connectors and replace fittings.your cig lighter should work now,

Jon

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 21st, 2025 - 1:01 PM