How To: View DVD & Navigation While Driving, For the Pioneer AVIC-D3 Options

[CaliJeff]

Tools needed:
Needle nose pliers
2 Wire tap-in's

Time Required:
5 minutes

STEP 1. Remove the mute wire (yellow and black wire) from the AVIC-D3 harness with needle nose pliers. This is located on the output or "rca" harness. Do this by placing the pliers nearest to the harness, and gently pulling out.
*** If you would like to retain the mute option you can go to radio shack and pick up a wire with the same end on it *** this wire should cost about 20 cents.

STEP 2. Move this pin into the empty slot above where you took the mute wire from.

STEP 3. Ground the wire you just moved (yellow and black wire) to main harness (black wire) with wire tap in.

STEP 4. Ground the parking brake lead (green wire) to main harness (black wire) with wire tap in.


*** Note - This technique for viewing movies while driving is strictly meant for Off-road use only.






This post has been edited by CaliJeff: Aug 2, 2007 - 2:29 PM

[Redline08]

as far as i know you cant change the color of the lights EASILY, im sure u can open the thing up void your warranty and solder in some red leds but it probably isnt worth it, same with the dimmer you cant really hook one up without tearing the whole thing apart. IMHO its just not worth it, at least the little thing where the cd goes into is red lol